Contacts!:
+ 49 / 23 30 / 63-243

DELTA-PROTEKT® VL 450


Product description:
The DELTA-PROTEKT® VL 450 is a topcoat. The topcoat provides the suitable sealing with mulitfunctional properties for all DELTA-MKS® basecoats which guarantee good corrosion protection. It is also perfectly matching the needs of a topcoat for other metallic surfaces.

Like all DELTA-MKS® products, the DELTA-PROTEKT® VL 450 is free of any harmful heavy metals, such as Cr-(VI), and conforms to EU guidelines relating to the End-of-Life Vehicle Directive (2000/53/EC) and the Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (2002/95/EC).

No hydrogen embrittlement occurs in the application of DELTA-PROTEKT® VL 450. As appropriate, the coating process can be carried out jigged or in bulk.

Corrosion resistance*:
BasecoatTopcoatTime
8 µm4 µm960h
10 µm6 µm1200h
* according to DIN EN ISO 9227 (depending upon the build-up of coats, geometry and type of application)
Corrosion resistance:
  • The corrosion resistance depends on the electroplated surface. It can be increased by the topcoat.
  • The corrosion resistance depends on the substrate. It can be increased by the topcoat.
Coefficient of friction:
  • Coefficient of friction (µtot): without definied coefficient of friction
Features:
  • suitable for rack and/or bulk parts
  • conforms EU End-of-Life Vehicle Directive 2000/53/EC
  • conforms EU Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment 2002/95/EC
  • no hydrogen embrittlement due to application process
Special Features:
  • Non-electrolytically applied zinc flake coating acc. to DIN EN ISO 10683 und DIN ES ISO 13858
  • organic
  • Colour: black
  • Chemical resistance
  • solvent-based
  • leaves dry, fingerprint und abrasion-resistant lubricating layers
  • suitable for electroplating surfaces
  • UV-resistance
  • available worldwide
  • even layer construction
  • delayed contact corrosion
  • very good adhesion characteristics
  • Curing temperature with max 210°C object temperature
Application:
Parts:
Big Parts
Big Parts
Chassis
Chassis
Small fasteners
Small fasteners
Big fasteners
Big fasteners
Stamped parts
Stamped parts
Braking systems
Braking systems
Springs
Springs
Nuts
Nuts
Clips, clamps
Clips, clamps

recommended
Partly recommended

Overview Topcoats    

The details stated in this product sheet are based upon our current knowledge and experience. They do not release the user from the testing that is inevitable, given the diversity of possible influences in the processing and application of our products. Any legal guarantee of specific properties of suitability for any concrete operational purpose may not be assumed from the information provided.