User login

Forgot your password?

Fastening and assembly

Coating solutions Markets Coaters Academy Press Company Glossary

Misc pages

Fastening and assembly

The task of screws and bolts is to join two or more components, actuated by adherence. In contrast to other fastening techniques such as riveting or welding, a connection established by screws or bolts can be loosened again at a later time point.

The decisive factor for the fastening outcome is the force with which the components are held together – so-called pretension. This should not be too great, as otherwise the components will be damaged and the bolt subjected to excessive stress. It should also not be too little, as the components will otherwise not be held together with sufficient force and will be able to move. The pretension of a screwed fastening cannot be measured directly, or only with comparatively great effort. A further key element of screwed fastenings is thetightening torque, the force acting on the bolt from the tightening movement. In comparison to pretension, tightening torque can be measured relatively easily using a torque wrench.

In addition, knowledge of coefficients of friction is elementary for the precise determination of pretension and tightening torque and therefore ultimately for establishing a secure connection. Similarly, trueness of gauge and setting behaviour also play an important role in this respect.

Fig. 1: Bolt testing stand

Misc pages

Curing in process
Conveyor belt oven (continuous oven)
Tray oven (continuos oven)
Chain conveyor oven
Chamber oven
Drying process
Cooling (after annealing)
Exhaust air treatment
KTL breakdown voltage
Condensed water test according to DIN EN ISO 6270-2
Sacrificial anode
Local element
Surface protection
Hot-dip galvanising
Flame spraying
Galvanic coating
Conversion layer
Dry-film coat thickness
Fastening properties
Gloss level
Artificial weathering test
Test procedures
Surface properties
Chemical resistance
Mechanical resistance
Natural weathering test
Physical properties
Passiveness, passive state
Protection, galvanic
Protection, temporary
Chromate Coating
Passivation coating
Rack coating
Bulk process
Partial production lot
Drum coating
Erichsen ball recess
Coating thickness, total
Coating thickness, local
Coating thickness, reference
Coating weight
Dry to the touch
Reference surface
Spray coating
Electroplated coating
Specific surface
Passive corrosion protection
Inorganic protective coatings
Organic protective coatings
Active corrosion protection
Forms of corrosion
Types of corrosion
Surface corrosion
Shallow pitting corrosion
Pitting corrosion
Contact corrosion
Bimetallic corrosion
Stress corrosion cracking
Hydrogen induced cracking
ISO 9001
Electro-dip painting (ETL)
Electrostatic powder spraying (EPS)
ISO 14001
Trueness of gauge
Coefficient of friction
Setting behaviour
Fastening and assembly
Kesternich test
Material effectiveness
Environmental management
Quality management
Magnetic induction measurement
Scaling protection
Powder coating
Coil coating
X-ray fluorescence analysis
Beta backscatter method
Mandrel bend test
Eddy current method (phase sensitive)
Eddy current method (amplitude sensitive)
Corrosion College
Powder sintering process
Zinc flake coatings
Dip coating process
Stone impact test
Process stages of KTL-seperation
Corrosion testing atmospheres conducive corrosion
Coat thickness and coat thickness measurement
Adhesion test according to DIN EN ISO 10683
Cross-cut test for adhesion
Thread tolerance
Pressure water jetting test
Fertiliser resistance
Anodic dip coating (ADC)
Cathodic dip coating (CDC)

Technical terms can not always be avoided. As corrosion experts, we not only want to give you comprehensive advice, we are also interested in making you a corrosion expert yourself.

The variety around the topic of corrosion and corrosion protection is also in our glossary at home: explanations from A as in Adhesion to T as in Thread tolerance. Have fun clicking through!