Press

PRESS

Are you looking for current information about Dörken MKS? Whether it is press reports on current themes, official company notifications or the latest corrosion protection technology: the latest news can be found in our press section.

Your contact

Matthias Fischer

Tel.: +49 2330 9134058

Contact


Topic	Date	Location	Description
New seminar planner out for 2020	10/17/19	Herdecke	“Learning with our experts": this is the strapline Dörken MKS has used to publish the new seminar planner for the seminars and training run by “THE CORROSION COLLEGE" for 2020. The new programme is...
Meeting of experts at the Dörken Days USA	10/09/19	Manistee, Lake Michigan	Meeting of experts at the Dörken Days USA August 2019 witnessed this year’s Dörken Days USA – this time in the fabulous ambience of the Manistee National Golf & Resort in Manistee on Lake Michigan....
Corrosion protection for agricultural equipment - Dörken MKS at the Agritechnica	10/08/19	Hannover	When the decision makers of the global agricultural equipment industry meet at the leading global fair for the sector, Agritechnica, in Hanover from 10 to 16 November 2019, Dörken MKS will also be...
Dörken MKS brings “fresh wind” to Husum	09/30/19	Husum, Germany	Experience effective corrosion protection for wind energy first hand: this was the motto for the appearance of Dörken MKS at this year’s Husum Wind in Husum, from 10 to 13 September 2019. Central...
Effective corrosion protection at the IAA	09/26/19	Frankfurt am Main	12 to 22 September 2019 saw the automotive sector present itself under the motto “Driving tomorrow” at the world-renowned IAA trade fair in Frankfurt. The focus of the exhibitors this year was...
Successful appearance at the Expo Nacional Ferretera	09/23/19	Guadalajara	High-performance corrosion protection systems for a range of different areas of use were presented by Dörken MKS at the Expo Nacional Ferretera in Guadalajara, Mexico from 5 to 7 September 2019. ...
Arrive safely with Dörken MKS	09/10/19	Frankfurt am Main, Germany	Dörken MKS presented its innovations and solutions for corrosion protection, lightweight construction and sustainability at the IAA 2019 in Frankfurt am Main. The solutions from the corrosion experts...
Dörken MKS visits Husum	09/10/19	Husum, Germany	Dörken MKS presented its innovations and solutions for corrosion protection and sustainability at the Husum Wind 2019. In particular, the new room temperature-curing solutions open up new coating...
Effective corrosion protection for cavities and pipe interiors	09/03/19	Herdecke, Germany	Thanks to a partial spray application, cavities and pipe interiors can be securely protected against corrosion with corrosion protection systems from Dörken MKS. Drilled holes in large metal...
Dörken MKS at Husum Wind	08/19/19	Herdecke/Husum, Germany	This year, Husum Wind will open its doors in Husum from 10 to 13 September. Dörken MKS will present its innovations in the areas of corrosion protection, sustainability and further development. Visit...
Driving tomorrow – for sure!	08/19/19	Herdecke/Frankfurt am Main, Germany	The IAA – International Automobile Exhibition – will open its doors this year under the motto "Driving tomorrow" from 10 to 22 September in Frankfurt am Main. Dörken MKS will present its innovations...
Resource-saving and smart	07/31/19	Herdecke/Spaichingen, Germany	Significant energy savings and reduced CO2 emissions – with its lightweight nuts for the car industry, Hewi G. Winker GmbH & Co. KG is regarded as a pioneer in this area. The fasteners are well...
Fully automatic coating of fasteners	06/27/19	Bergkamen, Germany	Bulten GmbH, a supplier of fasteners, is using a coating line that enables the fully automated coating of fasteners with Dörken MKS corrosion protection. The coating of fasteners or bulk parts in...
Dörken MKS exhibits at the Korea Metal Week 2019	06/19/19	Seoul	From 19th to 21st of June Seoul hosted the largest trade fair for the metal industrie: the Korea Metal Week. In addition to many Asian companies, Dörken MKS was also present with a booth. At Korea...
BRAZIL WINDPOWER	06/17/19	São Paulo, Brasilien	From 28th to 30th may Brazil Windpower 2019 took place for the first time in São Paulo. The 10th edition of the largest event in Latin America in the wind industry attracted around 3,000 attendees and...
Successful trade fair appearance at the second Fastener Fair USA	06/14/19	Detroit, Michigan (USA)	Fastener Fair USA, the only fastener and fixing exhibition in the U.S. for the full supply chain, opened its doors for the second time on 22nd and 23rd April 2019. The venue was Detroit, Michigan....
Curing at room temperature	06/12/19	Herdecke, Germany	Two new zinc flake products from Dörken MKS deliver a high level of corrosion protection and offer new opportunities for coating. Too large, too bulky, too temperature-sensitive to coat… attributes...
Fastener Fair Detroit celebrates second inauguration	06/04/19	Detroit, USA	On May 22ndand 23rd, the second Fastener Fair took place in Detroit, USA. Although the show is so new, it already has a major impact on the American Fastener and Fixing Industry. What value the show...
Welcome to Brazil!	05/27/19	São Paulo, Brazil	At the end of May, approximately 30 visitors accepted the invitation of Dörken MKS to attend the Dörken Day in São Paulo, Brazil. On 27th May, Brazilian corrosion experts of various industries met at...
New seminar program for the second half-year 2019 published!	05/23/19	Herdecke, Germany	The second half-year program 2019 of “THE CORROSION COLLEGE” by Dörken MKS offers a comprehensive seminar spectrum. / Under the motto “Learning with experts” the corrosion experts of Dörken MKS...
New inhouse license in Croatia!	05/10/19		Ferrotechnik GmbH is now part of the worldwide licensee network of Dörken MKS. The Austrian company produces in Croatia on a production surface of more than 8.500m². Here, various components are...
Out now: Dörken MKS spray can on Amazon Business!	04/29/19	Herdecke	The handy zinc flake spray can from Dörken MKS is now available for business customers to purchase from Amazon Business. The spray can DELTA-PROTEKT® REPAIR is used for the quick and easy coating of...
Innovation DELTA-HEAT®	04/12/19	Herdecke, Germany	New video about the DELTA-HEAT® coating awarded with the Klima Expo NRW A new coating system was developed by Dörken MKS in co-operation with VDEh-Betriebsforschungsinstitut GmbH und Walzwerken...
Award-winning – Top Product 2018!	04/10/19	USA	The zinc flake technology from Dörken MKS was awarded with the Top Product 2018 in the USA. For the 22nd time, Fastener Technology International (FTI) has elected the top products of the year. The...
Optimum screw connections thanks to new lubrication	04/03/19	Herdecke, Germany	A new lubrication from Dörken MKS provides a high level of corrosion protection and simultaneously enables a smooth fastening. In order to prevent thread-rolling screws from corroding, it is now...
Fastener Fair attracted Europe to Stuttgart	04/02/19	Stuttgart, Germany	From 19th to 21st March, the Fastener Fair Stuttgart was again the central point of contact for approx. 12.000 industry professionals of the fastening and fixing industry. For the 8th time, the...
High-performance protection for fasteners of all kinds	03/19/19	Stuttgart	At the Fastener Fair Stuttgart 2019, Dörken MKS presented its coating solutions for fasteners with special requirements. // The fair stand also saw the presentation of “THE CORROSION COLLEGE” – here...
Dörken MKS awarded prize for best employer for the second time	02/22/19	Berlin, Germany	Dörken MKS-Systeme GmbH & Co. KG was again honoured with the TOP JOB award for outstanding employer qualities on 22nd February 2019 by former Minister of Economic Affairs Wolfgang Clement in Berlin....
How to rack dip spin!	02/07/19	Herdecke, Germany	The rack dip spinning process is one of the most common application techniques used to coat components of the most diverse materials and industries. Dörken MKS, together with its partner WMV...
First trade fair appearance at BAU successful	01/25/19	München	From the 14th to 19th of January 2019 the BAU took place in Munich. The world's leading trade fair for architecture, materials and systems attracted more than 250,000 visitors from 150 countries to...
Dörken MKS at the BAU Munich for the first time	01/14/19	Munich, Germany	At the BAU Munich 2019 Dörken MKS-Systeme presented its high-performance coatings for components in the construction industry. / The fair stand also saw the presentation of “THE CORROSION COLLEGE“,...
The new seminar program is out now!	12/17/18	Herdecke, Germany	“THE CORROSION COLLEGE” of Dörken MKS Systems GmbH & Co. KG starts with a comprehensive seminar program to the year 2019. Following the motto “Learning with experts” the corrosion experts from Dörken...
In dialogue with Dörken MKS	11/26/18	Munich, Germany	At the end of November, approximately 150 visitors accepted the invitation of Dörken MKS-Systeme GmbH & Co. KG to attend the Dörken Days in Munich. Corrosion experts from the whole value chain of...
Ding dong merrily on high	11/05/18	Cologne, Germany	Ringing out again after 18 months of silence: the bell “Petersglocke” of Cologne cathedral. Traditional bell technology meets state-of-the-art construction and coating techniques. In the summer of...
Dörken MKS exhibits at the China Wind Power 2018	10/22/18	Peking, China	From 17 to 19 October the China International Exhibition Center in Beijing hosted the largest Chinese trade fair for the wind energy industry: the China Wind Power 2018. In addition to many global...
Lab coat, theory and practice instead of school holidays	10/19/18	Herdecke, Germany	Ten students have seized the opportunity and secured a place a technical holiday course. For a week they exchanged their autumn holidays for lab coats, safety glasses and knowledge transfer in the...
Dörken MKS-Systeme at the Internationalen Suppliers Fair (IZB)	10/16/18	Wolfsburg, Germany	At this year's International Suppliers Fair (IZB) in Wolfsburg, Dörken MKS-Systeme presented high- performance corrosion protection for chassis and major components with difficult geometry. The IZB...
The lightness of driving - with zinc flake coatings	10/12/18	Herdecke, Germany	Lightweight construction is a major trend in the automobile sector. And with good reason: reducing weight enables a significant reduction in fuel consumption. In a current study commissioned by Dörken...
IAA Commercial Vehicles – a complete success	10/04/18	Hanover, Germany	From the 20th to the 27th of September 2018 the 67th IAA Commercial Vehicles with the motto "Driving tomorrow" took place in Hanover. The eight-day fair attracted more than 250,000 visitors to its...
High-performance protection for components in and on commercial vehicles	09/20/18	Hannover, Germany	At the IAA Commercial Vehicles 2018 Dörken MKS-Systeme presented its zinc flake systems on safety-relevant components in the area of the chassis. / The fair stand also saw the presentation of “THE...
Trouble-free assembly processes	09/20/18	Hamburg, Germany	At the WindEnergy 2018 Dörken MKS-Systeme presented its high-performance coatings for screwed fasteners in wind energy units. / Also introduced in Hamburg was “THE CORROSION COLLEGE” – a college in...
1st German Electrocoating Panel 2018	08/27/18	Melle, Germany	For the 8th time, the Deutsche Forschungsgesellschaft für Oberflächenbehandlung e.V. (DFO) invites you to discuss current electrocoating topics together with experts. The certified event will take...
Successful together at the “Surface & Coatings 2018”	07/02/18	Bangkok, Thailand	ASEANs leading machinery and technology event “Manufacturing Expo” took place from 20 to 23 June in Bangkok. Relevant to Dörken MKS-Systeme was the “Surface & Coatings 2018” – the international trade...
Ewald Dörken AG is one of the innovation leaders in 2018	06/29/18	Überlingen	Überlingen – For the 25th time, the TOP 100 competition has selected the most innovative companies of the German Mittelstand. One of these innovation leaders this year is Ewald Dörken AG. This was the...
Dörken MKS: Dörken Days China	06/27/18	Shanghai, China	On May 28 and 29, 2018, this year's Dörken Days China took place in Shanghai. The focus of the event was the market development in China and innovative coating solutions from Dörken MKS. Starting...
Viva Mexico: Dörken MKS at the Fastener Fair	06/21/18	Mexiko City, Mexiko	The Fastener Fair Mexico took place on 20th and 21st June in Mexico City. Dörken MKS Systems showcased itself there on a stand shared with its licensees Scherdel, Bright Finishing, Ansorge Mexico and...
Learning with experts	06/05/18	Stuttgart, Germany	Dörken MKS-Systeme presented “THE CORROSION COLLEGE” at the SurfaceTechnology Germany 2018 / The seminar programme offers target group-specific knowledge communication and project-oriented solutions...
Dörken MKS at Surface Technology Germany	05/29/18	Stuttgart	From 5th–7th June, Dörken MKS is pleased to present “THE CORROSION COLLEGE” at the Surface Technology Germany at booth C07 in Hall 1. Previously known under the name “O & S – Oberflächen und...
By experts for experts	05/23/18	New Delhi, India	The fifth Fastener Fair India, trade fair for fastening technology, took place on 18 and 19 May. Dörken MKS-Systeme GmbH & Co. KG was also present once again at the Pragati Maidan Exhibition Centre in...
New video format "Myjob"	05/16/18	Herdecke, Germany	Job descriptions have a face here at Dörken MKS. And this is what our employees show you in the new video format called “Myjob”. Twice a month you have the chance to meet our corrosion experts. The...
Dörken MKS offers platform for critical dialogue	04/30/18	Herdecke, Germany	The new MBN 10544 standard is currently a sensitive and much-discussed topic in the automobile sector. This is due to the fact that current Daimler specifications require screws and bolts to be tested...
Successful exhibition and networking at the Fastener Fair USA	04/16/18	Cleveland (OH), USA	On April 11 & 12, 2018 the first Fastener Fair took place in the USA. The venue was in Cleveland, Ohio. The two-day fair drew over 2,000 visitors to its halls, in which over 250 exhibitors from 20...
Learning by doing	04/06/18	Herdecke, Germany	This is already the sixth time that Dörken has organized a technical holiday course for pupils aged between 14 and 16. For four days of their easter holidays the teenagers had the opportunity to gain...
Indonesian automotive market on the rise	03/22/18	Jakarta, Indonesia	This year saw INAPA celebrate its tenth anniversary with an invitation to Jakarta, Indonesia from the 22nd to the 24th of March 2018. The fair is gaining in popularity every year and with over 1,100...
Dörken MKS at SURTECH 2018	02/14/18	Tokyo, Japan	The SURTECH Japan took place at the Tokyo International Exhibition Center from 14 to 16 February 2018, with a particular focus this year on nanotechnology, corrosion protection and robot technology –...
Positive atmosphere at the AUTO EXPO COMPONENTS 2018	02/08/18	Neu Delhi, India	For the 8th time, the VDA organised an official German communal stand at the leading Indian car fair, the AUTO EXPO. The automotive fair is held every two years on the Pragati Maidan exhibition site,...
VDI working group plant tour	02/07/18	Herdecke, Germany	VDI working group pays visit to Dörken MKS Further training at first hand: on 06 December 2017 the vehicle and transport engineering working group of the VDI Ruhr district association took a look at...
Innovation prize for Dörken MKS partner!	01/30/18	Herdecke, Germany	One recipient of the Innovation Prize of the State of Baden-Württemberg, awarded in Stuttgart on 28 November 2017, was Dörken MKS coating partner Metallveredelungswerk Sulz GmbH. Pioneering...
Bulten coating system in Bergkamen	01/04/18	Bergkamen	New coating system for efficient processes The globally successful fastener manufacturer Bulten AB recently began operations with an innovative in-house coating unit at its German site in Bergkamen....
Bulten coating system in Bergkamen	12/20/17	Bergkamen	New coating system for efficient processes The globally successful fastener manufacturer Bulten AB recently began operations with an innovative in-house coating unit at its German site in Bergkamen....
Corrosion protection for the Iranian automobile industry	12/19/17	Teheran	Dörken MKS informs at trade conference At a high-level trade conference of the Iranian automotive supplier SAPCO in Tehran corrosion protection was one of the central themes – a clear case for the...
Manager training programme China	12/11/17	Herdecke	A delegation of 20 managers from medium-sized companies in China recently visited Dörken MKS in Herdecke. The focus of the high-level visit lay above all on opportunities for bilateral co-operation,...
Korean Metal Week 2017	12/08/17	South Korea	Optimally coated: Dörken at the Korean Metal Week Corrosion protection systems from Dörken MKS are in demand worldwide – including in South Korea. From 24-27 October visitors to the Korean Metal Week...
Thailand Corrosion and Prevention Conference	11/14/17	Thailand	On 02/03 November the international Thailand Corrosion and Prevention Conference 2017 took place in Pattaya. Numerous acclaimed speakers from the fields of research and practice reported on the latest...
Dörken MKS-Systeme at the Agritechnica	11/08/17	Hannover	Dörken MKS-Systeme presents its DELTA-PROZINC® galvanic system at the centre of its appearance at the Agritechnica 2017. The company is exhibiting alongside its licensing partner OTN Galvanotechnik...
New licensee for DELTA-PROZINC®	10/24/17	Herdecke	Completed: OTN Galvanotechnik GmbH is now part of the global licensee network of Dörken MKS. At the company site in Elsbethen, south of Salzburg, a wide range of parts and components are set to be...
125 years Dörken - A thank you to customers and staff	10/13/17	Herdecke	Ewald Dörken AG celebrated its 125th anniversary at the end of September with a veritable mega event. At an exclusive show dinner the company and its five business units became the 'programme'. Jan...
THE CORROSION COLLEGE - New Seminars 2018	09/28/17	Herdecke	Through the THE CORROSION COLLEGE, Dörken MKS provides a transfer of knowledge focussed on the relevant target groups, plus projectoriented solutions covering all aspects of corrosion and corrosion...
IAA fair presentation: Chassis coating of Dörken MKS	09/13/17	Frankfurt	Dörken MKS is going to present a fully assembled chassis. One side of the chassis is coated with the current original surface and the other side with the high performance corrosion protection system...
Hands-on fair presentation	09/05/17	Frankfurt am Main	The fact that the firm’s highly-capable micro layers are also suitable for large components with difficult geometry was demonstrated by Dörken MKS-Systeme GmbH & Co. KG, Herdecke, with an impressive...
Dörken Days Brazil	09/05/17	Sao Paulo, Brazil	Current market opportunities and the latest corrosion protection systems were the focus of this year’s Dörken Days Brazil, held in Sao Paulo on 28 June 2017. Over 40 licence partners from coating...
Groupe PSA specifications fulfilled!	08/18/17	France	A new challenge is overcome: following intensive research and extensive testing, the zinc flake system from Dörken MKS has been included in the specifications of the Groupe PSA car company and can now...
Dörken MKS extends network of coaters in Taiwan	08/15/17	Taiwan	In recent months Dörken MKS has further extended its network of coaters in the key growth market of Taiwan, certifying new licensees. Growth market for fasteners Taiwan has become one of the most...
Giant screw as eye-catcher	06/30/17	Mexico City	The Fastener Fair Mexico took place on 20 and 21 June in Mexico City. Dörken MKS Systems showcased itself there on a stand shared with its licensees, Scherdel, Bright Finishing, Ansorge Mexico and...
'Surface & Coatings' on the up	06/30/17	Bangkok	The international 'Surface & Coatings 2017' trade fair and conference for surface technology took place from 21 to 24 June in Bangkok. The event is gaining increasingly in importance in a country with...
Dörken MKS at the world's largest car fair	05/11/17	Shanghai	From 21 to 28 April 2017 Dörken MKS-Systeme was present on the German communal stand at the Auto Shanghai 2017. With over 1,000 exhibitors from 18 countries and over one million visitors over eight...
Pioneering mood at the Fastener Fair India	05/11/17	Mumbai	On 28 and 29 April 2017 Dörken MKS-Systeme took part in the Fastener Fair India. This year saw the Indian edition of the international trade fair series for fasteners held once again at the Bombay...
Well-cooled transformers	05/02/17	Korean	Transformers have been used in the global energy sector for many decades. They transform, increase or reduce voltages, currents and resistance in an alternating current circuit – thus enabling the...
Easy riding with Dörken MKS	05/02/17	Herdecke	The Italian motorcycle brand Ducati has offered perfection in biking since 1926. Founded in Bologna, over the course of the decades Ducati Motor Holding S.p.A. – the official name of the firm – has...
Photo project - 125 years Dörken	04/21/17	Herdecke	125 years - 125 faces! To mark the company’s 125th anniversary, Dörken launched an extraordinary photographic project with 125 employees at the start of the year. Recently, the company's headquarters...
Dörken MKS at the Fastener Fair	03/29/17	Stuttgart	In Stuttgart the company presented its full product portfolio in the field of zinc flake, electroplating and KTL. Coated parts that had been subjected to various test cycles were used to illustrate...
State-of-the-art surface know-how	03/24/17	Herdecke	As a leading coater of rail vehicles, Microcapas has made a name for itself far beyond the Spanish Basque Country. For many years now the company has co-operated with Dörken MKS as a licensee – with...
Surtech 2017	03/15/17	Tokio	From 15 February to 17 February the exhibition SURTECH 2017 took place in the “Tokyo International Exhibition Centre”. The trade fair for Surface Technology registered about 53.000 visitors who mainly...
Round table at the Corrosion College of Dörken MKS	03/02/17	Herdecke	Representatives of the Agrati Group have paid a two-day visit to Dörken MKS in Herdecke. In the modern Corrosion College the visiting employees learned about the latest technology in the field of...
Dörken MKS wins "Top Job" employer award	02/20/17	Berlin	At the award ceremony for the prestigious "Top Job" employer competition in Berlin on 17 February 2017 the managers of Dörken MKS-Systeme GmbH & Co. KG (Herdecke) had every reason to be pleased. The...
Corrosion protection in the maritime sector	02/16/17	Hamburg	Corrosion protection is a key issue in the economical and safe construction and operation of long-lasting components in maritime environments. In the search for the right protection strategy close...
Metallveredelungswerk Sulz am Neckar, the new licensing partner	02/15/17	Sulz am Neckar	The innovative surface coating specialist Metallveredelungswerk Sulz am Neckar is set to expand its portfolio with the addition of KTL DELTA-eLACK® from Dörken MKS. For 20 years now Sulz has offered...
Longstanding co-operation	12/15/16	Mexico	Scherdel has been working exclusively with Dörken for over 30 years. "We are delighted that our longstanding partner is further intensifying our co-operation with the new coating plant and wish...
Dörken Days 2016	12/15/16	Münster	This year the Dörken Days took place in Münster, from 24 to 26 November 2016. Numerous representatives from the automobile industry as well as the subcontractor industry from throughout Europe and...
Dörken MKS awarded prize for organisation	11/02/16	Berlin, Germany	Dörken MKS has been awarded a prize by a jury of experts in Berlin for its exemplary market orientation and consistently customer-oriented organisation. Recognition for customer orientation and...
Fastener Fair Stuttgart	10/10/16	Messe Stuttgart	http://www.fastenerfair.com/stuttgart/2019/english/
Culture and technology in tandem	10/06/16	Herdecke	The Bochum District Association's senior citizens group of the German Engineers' Society are a spry bunch. Every month they take a trip to look around a technical facility, followed by a bit of...
IAA Commercial vehicles – a complete success for all involved	10/04/16	Hannover	Dörken MKS Corrosion Experts showcased their products at the IAA Commercial Vehicles in Hanover from 21st to 29th of September 2016 under the theme of KTL 2.0. The benefits of the tailor-made...
Active corrosion protection	09/21/16	Hannover	The combination of the KTL coating Delta-eLack® and a zinc flake coating lends high-performance corrosion protection to many of the components fitted to commercial vehicles. This serves to...
Award-winning!	09/19/16	Gelsenkirchen	Dörken MKS-Systeme receives a distinction for its DELTA-HEAT© from KlimaExpo.NRW. The coating can reduce scaling by up to 80 percent in the production of high-alloy steels, significantly cutting...
Freshly painted!	09/12/16	Herdecke	The employees of Dörken MKS-Systeme had a "brush with success" in the scope of this year's international meeting. Around 80 colleagues from around the world and representatives of the specialist...
Brazil Windpower 2016	08/02/16	Rio de Janeiro	http://www.brazilwindpower.org/
Ewald Dörken AG is one of the TOP 100	06/28/16	Essen	Herdecke-based company numbers among Germany's innovations elite / Dörken MKS-Systeme, a Dörken Group company, has also been awarded the coveted seal of quality for the fifth time. / Distinction...
Press Facts O&S 2016	06/27/16	Stuttgart	At O&S in Stuttgart, Dörken MKS Systems presented the new possible uses of its Delta-eLack® KTL technology. Combining it with a zinc flake coating makes the topcoat into a cathodic corrosion...
Joint appearance – Surface & Coatings 2016	06/27/16	Bangkok	Thailand is one of the leading growth markets and is also becoming increasingly significant with regard to surface protection for parts, components and fasteners for the automobile industry. For this...
Ewald Dörken AG is one of the TOP 100	06/27/16	Essen	Herdecke-based company numbers among Germany's innovations elite / Dörken MKS-Systeme, a Dörken Group company, has also been awarded the coveted seal of quality for the fifth time. / Distinction...
CII 2nd Edition Surface & Coatings	06/24/16	Chennai	http://www.ciisce.in
Surface & Coatings 2016	06/23/16	Bangkok	http://www.surfaceandcoatings.com
Dörken Days China 2016	06/22/16	Shanghai	The Dörken Days China 2016 took place at the Shanghai Marriott Hotel Parkview from 23 to 24 May 2016. The invitation was taken up by 125 representatives from 66 companies and organisations -...
Duo at the Fastener Fair India	06/13/16	New Dehli	On 19 and 20 May 2016 Dörken MKS-Systeme and its coating partner Nihonparker India were present on a communal stand at the Fastener Fair India. This year saw the Indian version of the international...
Tech-Day in Paris	05/29/16	Paris	On 11 and 12 May Dörken MKS-Systeme staged a Tech-Day in Paris for the French market. Around 30 guests took part in the meeting, drawn from all along the value-added chain, including representatives...
Trouble free fitting through new topcoat	05/29/16	Herdecke	A new Dörken MKS Systems topcoat offers optimised threaded connection properties when fitting against parts made of aluminium or against KTL-coated surfaces. In launching the Delta-Protekt® VH 301.1...
New tech centre for "green" electroplating	05/29/16	Herdecke	Dörken MKS-Systeme has opened its own technology centre for the new field of Electroplating. / The entire coating process can now be recreated in close-to-production form on a highly-modern coating...
Korea Metal Week 2016	05/29/16	Kintex, South Korea	http://www.korea-metal.com
ZVO-Oberflächentage 2016	05/29/16	Garmisch-Partenkirchen	http://www.oberflaechentage.de
EU Meeting of Dörken MKS coating applicators	05/27/16	Herdecke	The new “green” line of electroplating attracts great interests from the participants. / Representatives of fastener makers talk on the keynote topic of ‘Ford and their suppliers’. / A visit to the...
Italian Fasteners Association	05/27/16	Milano	Conference with Italian Fasteners Association about ”Chromium (VI)-free zinc flake coatings – Five years on from the introduction of the EU Vehicle End-of-Life Directive” Working in conjunction with...
New Analytics Department launched	05/27/16	Herdecke	Dörken MKS Systems opens new chemical analysis lab At the end of November, Dörken MKS-Systeme GmbH & Co. KG of Herdecke brought a new laboratory online for chemical analysis. The company has invested...
Two new topcoats at the O&S	05/27/16	Herdecke	Delta-Protekt® VH 301.1 GZ offers optimised fastening properties for assembling with aluminium components or against e-coat surfaces. / Delta-Lube® 10 was developed as a lubricant for large-dimension...
Creating new links	05/27/16	Herdecke	On 18 and 19 March 2013 the Agrati Group - Fastening Systems, one of the world's leading companies in the field of fastening technology, was a guest at Dörken MKS-Systeme Dörken MKS-Systeme welcomed...
Dörken MKS on the Fastener Fair Mexico	05/27/16	Mexico	The well-established Fastener Fairs take place in Mexico for the first time – and the Dörken MKS-Systeme are both going to exhibit and to give a short lecture. In the Bonamex Centre Mexico City, booth...
Complete programme	05/27/16	Stuttgart	At the O&S in Stuttgart Dörken MKS-Systeme presents a new zinc flake surface with a colour-fast, black appearance, which meets the complex requirements of the automobile industry for higher corrosion...
Quality offensive	05/27/16	Wetter an der Ruhr	From 8 to 10 September 2015 Wetter (Ruhr) was the venue for this year's International Meeting of Dörken MKS-Systeme, featuring executive colleagues from all around the world and representatives of the...
NRW Efficiency Prize 2015 for High Temperature Corrosion Protection	05/27/16	Nordrhein-Westfalen	Dr. Gerhard Reusmann, Managing Director of Dörken MKS-Systeme, received the coveted award from NRW Minister of the Environment Johannes Remmel on 21 October 2015. / Delta-Heat® reduces material loss...
The coating of screws – More than corrosion protection	05/27/16	Parma	From 17 to 19 March 2016, the MECSPE trade show took place in Parma. It is an international trade fair for the specialised mechanics sector that offers a comprehensive overview of all areas of the...
Ewald Dörken AG receives top-innovator distinction	05/26/16	Herdecke	Herdecke-based company makes "Top 100" / Honour awarded by Ranga Yogeshwar at German SME summit. / Dörken MKS-Systeme, a Dörken Group company, also awarded the coveted seal of quality for the fourth...
In the black	05/26/16	Herdecke	Dörken MKS-Systeme presents a new surface finish with a stable black appearance. / The complex requirements of the automobile industry with regard to corrosion resistance and optimised assembly...
New fair with trade congress in Bangkok	05/26/16	Bangkok	Thailand is developing into a leading growth market in the automobile industry and a hub for the entire Asia-Pacific region. As a result, surface protection for parts, components and fasteners with...
Automotive Center Südwestfalen officially opened	05/26/16	Attendorn	Dörken MKS-Systeme as a partner congratulates acs on the on-time completion of the new development centre. The ‘acs’ (Automotive Center Südwestfalen GmbH) in Attendorn was formally opened on 9th July....
KTL in system design	05/26/16	Herdecke	The new EC dip coat Delta-eLack® 800 can also be combined with a zinc flake basecoat. / This enables a high-performance cathodic protection to be achieved specifically for small bulk parts. / The...
Premiere for the new galvanic system Delta-Prozinc®	05/26/16	Herdecke	Delta-Prozinc® is a process-safe, highly-efficient and non-hazardous electroplating system with superb corrosion protection and assembly properties. / The new product range is offered alongside the...
Visitors from all over the world in Düsseldorf – invited by Dörken MKS Systems to Dörken Days	05/26/16	Düsseldorf	As part of the 'Dörken Days: The brand new days' event at the end of September around 230 visitors from all over the world came to Düsseldorf to learn about Dörken MKS Systems' latest developments. /...
Concentrated German presence at New Delhi subcontractor fair	05/26/16	New Delhi	From 6 to 9 February 2014 Dörken MKS-Systeme was present at the Auto Expo 2014 - Components in New Delhi. The company joined 18 further German automotive suppliers in the German pavilion, a joint...
Gold for DELTA-MKS® coatings: chance to shine at the 2018 Winter Olympics in South Korea	05/26/16	South Korea, Pyeongchang	Tracks for a new high-speed railway are being built to expand infrastructure for the next Winter Olympics, to be held in South Korea in 2018. The goal here is to connect the capital, Seoul, with the...
Dörken MKS-Systeme open new office and TechCenter in Shanghai	05/26/16	Shanghai	The Chinese Dörken Days took place in Shangai 17th till 18th February 2014. Within this context the new Dörken MKS-Systeme (Shanghai) Co., Ltd. office was opened in the district of Zhabei. Due to the...
High-performance zinc flake basecoat	05/26/16	Stuttgart	At the Fastener Fair, Dörken MKS Systems presented Delta-Protekt® KL 120, the company's new, strong basecoat with outstanding corrosion protection properties. / A particular feature is the extremely...
Delta-Prozinc® making its way into customer specifications	05/24/16	Herdecke	Delta-Prozinc® has achieved a good position in the market in just two years. / Many users have recognised the benefits of the highly efficient systems that offer process reliability and pose no harm...
A3TS Kongress 2016	05/19/16	Nancy	Dr. Martin Welp, CEO of Dörken MKS, gives a lecture on the occasion of the Congress on June 9 at 11:30. http://www.a3ts-congres.fr
Fastener Fair Mexico 2016	05/19/16	Mexico City	http://www.fastenerfair.com/mexico/english/ Visit us at booth 140.
IAA Nutzfahrzeuge 2016	05/19/16	Hannover	http://www.iaa.de/
O&S 2016	05/18/16	Stuttgart	Successful participation at O&S 2016 Numerous visitors showed huge interest on our KTL 2.0: DELTA-eLACK® provides new perspectives for an already well established technology. Please find further...
Complete programme	06/20/11	Hannover	Dörken MKS-Systeme presented its new "green electroplating" area of expertise at the Hannover Messe. / With Delta-Prozinc® the company revealed its expertise as a complete provider in the field of...
New licensee in Thailand	06/07/11	Thailand	THAI PARKERIZING CO. LTD. is a new licensee of Dörken MKS-Systeme. On 7 June 2011 the official certificate was handed over to Mr Sato CEO (centre) and Mr Chanin GM (left) by Onnen von Bredow, Vice...
Giving impetus to the German economy	07/06/10	Rostock	‘Top 100’ honours Germany’s most innovative companies. / Ewald Dörken AG included this year for already the second time. Resourceful employees, courage to experiment and creative marketing of new...
Dörken MKS Systems celebrates 30 years in business	07/01/10	Herdecke	Attendance at the international ‘O&S’ trade fair for surface treatments and coatings in Stuttgart formed the start of a series of MKS events linked to the company’s 30th anniversary. From 8th to 10th...
Dörken at the Fastener Fair	06/14/10	Stuttgart	Dörken MKS-Systeme has begun a year that will see it participate in many trade fairs at home and abroad. / In Stuttgart the focus of the presentation was upon genuine "success stories" with proven...

Zinc flake

KTL

Automotive

Renewable energy

Seminars

Careers

Press

PRESS

Your contact

Tel.: +49 2330 9134058

Contact

Zinc flake

KTL

Automotive

Renewable energy

Seminars

Careers

User login

Press

PRESS

Your contact

Tel.: +49 2330 9134058

Contact